United Kingdom 
Español 
Français 
Netherlands 
English 
Deutsch 
Coax joints
- Coax connections
- Inside / outside / underground, above ground, underwater, in cable ducts
- Filoform's coax joints uses thermoshrink technology with a special and high quality sealing material
- Easy installation
- Less heat to be applied for the shrinking process
- Excellent protection of the cable and connector due to a lower temperature needed during the shrinking process
- High shrink ratio
- Excellent adhesion to all cable materials
- Suitable for connection and transition joints
- Guaranteed quality; the concept has been used in telecom joints for over a decade
- Suitable for underground and above ground use
- Easy to re-enter so cables and connectors can be reused
Sealpass sealing material
- Excellent watertight sea
- Adjusts automatically to every shape
- Sealpass is used for protection of pipelines, cables and cable connections
- Very good adhesion on steel, plastics and on uneven surfaces
- Provides corrosion protection
| Thickness EPT-butyl rubber | 1mm | ASTM D 1000 |
| Thickness butyl rubber petroleum jelly | 1mm | |
| Total thickness | 2mm | |
| Width | 50mm | |
| Adhesion RVS | 1500 g/25mm at 20°C | ASTM D 1000 |
| Adhesion PE | 1000 g/25mm at 20°C | ASTM D 1000 |
| Tensile strength | 3.0 kg/25mm | ASTM D 1000 |
| Elongation at break | 600% | ASTM D 1000 |
| Insulation resistance | 1.0 x 10¹⁵ ohm cm | ASTM D 257 |
| Dielectric strength | 33 kV | ASTM D 149 |
| Water absorption | 0.1% | ASTM D 570 |
| More information | Contents
|
|---|---|
| Home page product list | No |