United Kingdom 
Español 
Français 
Netherlands 
English 
Deutsch 
Filoflex
Filoflex is a low viscosity, semi-rigid two-part polyurethane resin, exhibiting high electrical strength, toughness and adhesion. It is designed for use as a cable jacket repair system for splicing and repairing of portable/flexible cables, and is particularly suitable for encapsulation of surface and subsea electrical connections.
Filoflex has an operating temperature range of -50 to +120°C, with maximum operating temperature of 130°C and an electric insulation rating of 25 kv/mm.
- RoHS Compliant
- Non-toxic
- Low water absorption (0.3% 168 hours @ 23°C)
- High resistance to seawater
- Available in 250ml and 600ml Packs
| Properties | Unit | Value |
| Gel Time (150g mass @ 25°C) | Minutes | 20-30 |
| Water absorption (24 hours @ 23°C) | % | 0.09 |
| Water absorption (168 hours @ 23°C) | % | 0.3 |
| Hardness | ShoreA | 85 |
| Tensile Strenth | Mpa | 10 |
| Elongation at break | % | 200 |
| Compressive Strength | Mpa | Flexible |
| Thermal conductivity | W / m.K | 0.22 |
| Coefficient of thermal expansion | ppm/°C | 75-100 |
| Operating temperature range | °C (application & geometry dependant) | |
| Maximum Service temperature | °C (application & geometry dependant) | 130 |
| Volume resistivity | ohm.cm | 315 |
| Surface Resistivity | ohm.cm | 214 |
| Electric Strength | kV/mm | 25 |
| Dielectric Constant | 100 Hz | 3.1 |
| Dielectric Constant | 1 kHz | 3 |
| Dielectric Constant | 10 kHz | 3.7 |
| Dissipation Factor | 1 MH2 | 0.023 |
| Home page product list | No |
|---|